Text appears: Razer Skins Application Walkthrough
We open on a front shot of the Razer Skins in its packaging.
The packaging is flipped to the back.
A hand pulls and tears off a perforated tab that runs along the side of the packaging.
3 layers of Razer Skins are pulled out: one labelled ‘Top Cover’, one labelled ‘Keyboard & Touchpad’, and one labelled ‘Bottom Cover’.
Text appears: Top Cover
Text appears: Moisten the included cleaning cloth with a small amount of warm water and use to remove any residue or buildup from your laptop. Do not use any chemical cleaners as they may prevent the skin from attaching properly.
The top of the laptop is wiped clean with a small damp cloth.
Text appears: Remove your Razer Skin from the film packaging
The ‘Top Cover’ layer of the Razer Skin is carefully peeled off its film packaging and laid adhesive side up.
Text appears: Re-attach wrap film to back of your Skin for easier application
The film packaging is stuck back onto the Razer Skin, leaving roughly 1-2 inches of its adhesive side exposed.
Text appears: Flip over to align the Skin with your laptop
The Razer Skin and film packaging is flipped over.
Text appears: Align the Skin along all edges
Now with the adhesive side down, the Razer Skin is carefully aligned to the edges of the laptop.
Text appears: Gently attach the Skin to your laptop and remove bottom sheet
A hand gently presses down on the Razer Skin and rubs across its length to complete the initial application. Once done, the film packaging is slowly pulled away with one hand, while the other hand gently presses down to ensure the remaining adhesive side is applied.
Text appears: After proper alignment, peel off the protective film
Once the Razer Skin is applied, a hand carefully pulls a tab along the corner of the Razer Skin to peel off its protective film.
Text appears: Once the fit is confirmed, press firmly throughout the Skin to activate the adhesive and remove any air bubbles
The hands run along the entire surface of the laptop, firmly pressing down on the Razer Skin and taking time to feel and squeeze out any air bubbles.
Text appears: Bottom Cover
Text appears: Wipe down with cleaning cloth to remove any residue
The laptop is flipped over and its underside is wiped clean with a small damp cloth.
Text appears: Remove your Razer Skin from the film packaging
The ‘Bottom Cover’ layer of the Razer Skin is carefully peeled off its film packaging and laid adhesive side up.
Text appears: Re-attach wrap film to back of your Skin for easier application
The film packaging is stuck back onto the Razer Skin, leaving roughly 5-6 inches of its adhesive side exposed.
Text appears: Flip over to align the Skin with your laptop
The Razer Skin and film packaging is flipped over.
Text appears: Align the Skin along all edges
Now with the adhesive side down, the Razer Skin is carefully aligned to the edges of the laptop.
Text appears: Gently attach the Skin to your laptop and remove bottom sheet
A hand gently presses down on the Razer Skin and rubs across its length to complete the initial application. Once done, the film packaging is slowly pulled away with one hand, while the other hand gently presses down to ensure the remaining adhesive side is applied.
Text appears: After proper alignment, peel off the protective film
Once the Razer Skin is applied, a hand carefully pulls a tab along the corner of the Razer Skin to peel off its protective film.
Text appears: Once the fit is confirmed, press firmly throughout the Skin to activate the adhesive and remove any air bubbles
The hands run along the entire surface of the laptop, firmly pressing down on the Razer Skin and taking time to feel and squeeze out any air bubbles.
Text appears: Keyboard & Touchpad
Text appears: Wipe down with cleaning cloth to remove any residue
The laptop is opened and its keyboard and surrounding areas are wiped clean with a small damp cloth.
Text appears: Remove your Razer Skin from the film packaging
The ‘Keyboard & Touchpad’ layer of the Razer Skin is carefully peeled off its film packaging and laid adhesive side up. Take care not to remove the touchpad layer yet, as that will be applied separately.
Text appears: Re-attach wrap film to back of your Skin for easier application
The film packaging is stuck back onto the Razer Skin, leaving roughly 1-2 inches of its adhesive side exposed.
Text appears: Flip over to align the Skin with your laptop
The Razer Skin and film packaging is flipped over.
Text appears: Align the Skin along all edges
Now with the adhesive side down, the Razer Skin is carefully aligned to the edges of the laptop.
Text appears: Gently attach the Skin to your laptop and remove bottom sheet
A hand gently presses down on the Razer Skin and rubs across its length to complete the initial application. Once done, the film packaging is slowly pulled away with one hand, while the other hand gently presses down to ensure the remaining adhesive side is applied.
Text appears: Repeat steps for trackpad
The laptop’s trackpad is wiped clean with a damp cloth, before following the same steps for application.
Text appears: After proper alignment, peel off the protective film
Once the Razer Skin is applied, a hand carefully pulls a tab along the corner of the Razer Skin to peel off its protective film. Do this for both the main layer and touchpad layer.
Text appears: Your Razer Skin should cure within 48 hours and form a strong attachment to your laptop.
Razer logo appears.